Aluminium Alloy Wire manufacturers

CanaryMod related discussions

Aluminium Alloy Wire manufacturers

Postby hjt » Wed Aug 29, 2018 7:13 am

Chemical Composition Limits
Alloy 4043Bal4.5-6.00.60 max0.30 max0.15 max0.10 max0.15 max0.20 max0.05 max each0.15 max total
Alloy 4043 is one of the oldest and most widely used welding and brazing alloys. AL4043 can be classed as a general purpose type filler alloy. Due to the addition to silicon alloy 4043 results in improved fluidity (wetting action) to make alloy 4043 the preferred choice by welders. Alloy 4043 is less sensitive to weld cracking and brighter and almost smut free welds.
Aluminium MIG and TIG Welding wire and Rods
Used on1xxx, 3xxx, 6xxx series alloys.
2014, 2219, 5005, 5050, 5052, 7005, 7039, N21.
Al-Si, Al-Si-Mg casting alloys and combinations of above materials.
Al - Lithium alloys.
DTD372B, LM4, LM2, LM6, LM9, LM20, LM25, LM2 .
Cross-Reference of SpecificationsMSRR 9500/32
AMS 4190D Aluminium Alloy, Welding Wire
N21 (NG21)
MSRR 8065
UNS A 9 4043
Fed-QQ-R-556 Class 4043
Alloy 4043 A (BS 2901 PT4)
ER4043, R4043 (AWS A5.10.92)
Availability Ex stock MIG spools and TIG rodsSpools 0.5kg, 2.5kg and 15kg European manufacture
Spools 1 lb, 5 lb and 25 lb American manufacture
Rods 1 kg, 2.5kg, 5kg and 10kg packs European manuf.
1000mm lengths, Flag tagged for traceability
Rods 5 lb American manufacture
Flag tagged for traceability
For all stock availability contact Sales.
Weld PropertiesMelting range 573°- 625°C
Density 2.68gm/cc
ALLOY 4043 is an Al-5% Si alloy, non-heat treatable.
ALLOY 4043 has a lower melting range than the base metals for which it is commonly used and relieves contraction during weld cooling. Aluminium Alloy Wire manufacturers
Posts: 5
Joined: Wed Aug 29, 2018 7:09 am

Re: Aluminium Alloy Wire manufacturers

Postby ivannaeden » Wed Sep 12, 2018 1:36 pm

Copper keeps on being conductive even after it discolors. consider of what number of properties, homes and circuit sheets have been around for a few years with unprotected copper wiring and by and by propensity without issues. I may take my conceivable outcomes leaving the revealed load up unprotected over the potential outcomes of a conductive covering being the conductive floor.
Posts: 1
Joined: Wed Sep 12, 2018 1:28 pm

Aluminium Alloy Wire manufacturers

Postby LemonCog » Wed Sep 19, 2018 8:55 pm

I use an aluminium alloy braking carabiner, but some cavers told me that its better to use a steel braking carabiner.

I think that an aluminium carabiner can brake better.

What do y think about it?
[url=""]HD Wallpapers[/url]
Posts: 4
Joined: Tue Sep 11, 2018 3:56 pm
Location: Czech

Return to Discussions

Who is online

Users browsing this forum: No registered users and 1 guest